Diesel filtration and fuel polishing systems for mine-site fuel farms, camp power and remote bulk storage. Dust, water and microbial contamination load is high and logistics are long — regenerable membrane filtration keeps fuel clean without a cartridge resupply chain, with reduced on-site civil works.
Diesel filtration and fuel polishing for mine-site fuel farms, camp power and remote bulk storage. Regenerable membrane filtration handles high dust, water and microbial contamination loads without a cartridge resupply chain; containerised configurations such as the JY-Q325 are used where conventional civil works are impractical.
For remote operations, Jingyuan systems are used as part of a fuel cleanliness management strategy — regenerable filtration removes the cartridge logistics chain entirely.
Containerised circulation loop — lifted into place, no building or concrete pad required. The default mine-site duty.
Wheeled JY-G100 rotated between tanks — economical for smaller camps and satellite storage points.
High-flow filtration during transfer from the regional supply base to the mine — clean fuel arrives on site.
| Site Profile | Recommended Starting Point | Duty Basis |
|---|---|---|
| Satellite camp / small fuel point | JY-G100 · 2.5 m³/h mobile | Wheeled multi-tank rotation |
| Camp fuel farm & off-grid sites | JY-Q325 · 40 m³/h containerised | Reduced civil works, explosion-proof as standard |
| Fixed plant / workshop fuel conditioning | JY-DX40 · 40 m³/h skid | Permanent installation with infrastructure |
| Regional supply base transfer | JY-DL60 · 60 m³/h | Pipeline-driven high-flow transfer duty |
Guideline only — confirm sizing against your tank inventory, delivery schedule and equipment fleet. Our engineering team reviews every case.
Dust, water and microbial load enter with delivery and storage.
Rigid composite polymer membrane strips free water and captures particulates at room temperature.
Compressed-air pulses clear the membrane — no cartridge resupply to a remote site.
Protects haul trucks, drills and gensets from injector damage.
The 20ft JY-Q325 arrives as a sealed, explosion-proof station. It is lifted into place, connected and commissioned with minimal building work — reducing dependence on concrete pads and on-site construction where civil works are slow or expensive. Final site preparation depends on ground conditions, lifting access and local requirements.
JY-Q325 ships with an explosion-proof motor and electrical switches as standard, suitable for the hazardous-area classification typical of fuel farms and loading areas. JY-DX40 offers the same as standard on a skid format.
Because the CIS membrane regenerates by gas pulse, there are no filter cartridges to stock or fly in. Operating cost is dominated by electricity, not consumables.
JY-Q325 (40 m³/h, containerised, explosion-proof as standard) is the default for camp fuel farms and off-grid sites. JY-DL60 serves high-flow transfer at the regional supply base, JY-DX40 suits fixed plant installations, and the wheeled JY-G100 covers multi-tank rotation at smaller fuel points.
Yes — fixed systems serve multiple tanks via a circulation manifold, and the wheeled JY-G100 can be moved between tanks in rotation where a dedicated system per tank is not justified.
Q325 and DX40 need electrical supply for the explosion-proof pump motor plus compressed air for gas-pulse backwash. DL60 is pipeline-driven (0.2–0.4 MPa, customer-supplied pump) with no onboard motor — requirements are confirmed against your site utilities during engineering review.
Tell us your tank sizes, site utilities and the contamination issue you are facing. You do not need to select a model yourself — an engineer reviews every request and recommends the right configuration.