The JY-G100 is a mobile trolley-mounted diesel polishing system rated 2.5 m³/h. A 5000 Gs high-intensity magnetic pre-filter intercepts ferrous wear debris, then the CIS rigid composite polymer membrane delivers 2–25 µm filtration (5 µm standard) with 30-second gas-pulse regeneration and no disposable filter cartridges. Built for emergency fuel polishing and field deployment where civil works are impractical.
| Model | JY-G100 | Mobile fluid purification system |
| Rated flow | 2.5 m³/h | Point-of-use / mobile duty |
| Filtration precision | 2–25 µm (standard 5 µm) | Dual-stage |
| Filtration performance | βₓ ≥ 200 at specified test conditions | ISO 16889 basis |
| Working pressure | 0.2–0.4 MPa | Backwash trigger 0.5 MPa |
| Core filter material | 5000 Gs magnetic adsorption + CIS rigid composite membrane | Dual-stage |
| Regeneration method | Gas-pulse backwash · chemical soak · solvent cleaning | No disposable cartridges |
| Structure type | Mobile trolley | No civil works |
| Power source | Electric motor pump group | Plug-and-run |
| Applicable medium | Diesel, hydraulic oil < 46# | Broad compatibility |
| Magnetic pre-filter intensity | 5000 Gs | Ferrous debris capture |
| Target cleanliness | NAS 6 (≈ ISO 16/14/11) | Per ISO 16889 basis |
| Membrane service life | 2–3 years | No disposable cartridge cost |
Water, sludge and particulates enter with the fuel stream at the mobile trolley inlet.
5000 Gs magnetic adsorption intercepts ferrous debris, then the rigid composite polymer membrane captures particles and strips free water.
Compressed air clears the membrane surface — no cartridges to replace.
Fuel returns to tank at NAS 6 target cleanliness.
JY-G100 is right when you need mobile, point-of-use polishing: emergency fuel rescue at a remote site, a mining fleet fueling point, construction or wind-power backup sets — anywhere civil works are impractical and throughput of 2.5 m³/h is sufficient.
Need bulk transfer or depot throughput (40 m³/h)? See JY-DX40 or JY-DL60. Need a containerised, explosion-proof field station? See JY-Q325. Need the smallest compact skid? See JY-DX5.
2.5 m³/h, suited to point-of-use and mobile duty rather than bulk transfer of whole tanks.
High-intensity magnetic adsorption intercepts ferrous wear debris before the membrane, protecting precision HPCR injection systems and extending engine overhaul intervals.
Yes. The mobile trolley structure with an electric motor pump group requires no fixed civil installation — wheel it to the tank and run.
Diesel and hydraulic oil below 46#. Gasoline and other low-flash-point media are strictly prohibited.
Gas-pulse backwash plus chemical soak / solvent cleaning. The membrane design life is 2–3 years with no disposable filter cartridges.
Target NAS 6 (≈ ISO 16/14/11) on the treated fuel, per ISO 16889 basis.
We reply within one business day with a matched system recommendation and budget figure. No obligation.
